Mitsubishi Galant

1. Design of assembly of the top lever of a suspension bracket (Galant 1994 ÷ 1998 model of вып.) it is shown on an illustration.
2. To Poddomkratta the car also establish it on props. Remove the corresponding forward wheel.
3. Liberate the top spherical support from assembly of a rotary fist.

4. Give nuts of fastening of axial support of the top lever to a body element.

5. Remove assembly of the top lever.

6. Turn out through bolts of fastening of axial support of lever assembly.

2. Tighten nuts of through bolts of fastening of axial support with demanded effort (57 H • м). 3. Check correctness of installation of axial support by measurement of adjusting distances And and Century. Demanded values make 299.9 mm for And and 234.0 for Century.
4. Fix assembly of the top lever on a car body, having tightened new самоконтрящиеся axial support with demanded effort (86 H • м).
5. Plant the top spherical support in assembly of a rotary fist and fix its new самоконтрящейся a nut, having tightened the last with effort of 28 H • m.
6. Establish a forward wheel and lower the car on the earth.
7. In summary execute adjustment of corners of installation of forward wheels.