Mitsubishi Galant

1990 — 2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
- Settings and routine maintenance
   Schedule of routine maintenance of Mitsubishi Galant/Mirage/Diamante cars
   Specifications
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Replacement of impellent oil and oil filter
   Check, service and charging of the storage battery
   Check of a condition of components of system of cooling
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition and replacement of brushes of screen wipers
   Rotation of wheels
   Check of a condition of components of a suspension bracket and steering drive
   Greasing of components of the chassis
   Replacement of ATF of automatic transmission and differential of the main transfer, check of a condition and AT filter service
   Check of a condition of brake lines
   Check condition/service of disk brake mechanisms
   Check of a condition of protective covers of power shafts
   Check and adjustment of gaps of valves - only Mirage
   Replacement of a filtering element of an air purifier
   Service of system of cooling
   Replacement of the fuel filter
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Check of a condition and replacement of spark plugs
   Condition check, adjustment of effort of a tension and replacement of driving belts
   Check of a condition of components of system of production of the fulfilled gases
   RKPP transmission oil replacement
   Replacement of greasing of a transfer case - only all-wheel drive Galant
   Replacement of greasing of back differential - only all-wheel drive Galant
   Check condition/service of drum-type brake mechanisms
   Check of serviceability of functioning of the parking brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check of a condition of seat belts
   Check of a condition and replacement of components of system of ignition
   Check/adjustment of installation of a corner of an advancing of ignition
   Check of a condition of components of system of catching of fuel evaporations
   Check of a condition of components of a power supply system
   Check of a condition and belt replacement GRM drive (it)
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


General information about settings and adjustments

The name "control" in the real Management is meant as not separately taken procedure of adjustment any of parameters of systems of the car, and the whole complex of the adjustments, allowing to achieve maximum efficiency of return of the engine.
If the owner of the new car from the date of its acquisition strictly adhered to the schedule of procedures of routine maintenance (see. Undressed the Schedule of routine maintenance of Mitsubishi Galant/Mirage/Diamante cars), rather often carried out checks of critical parameters, supported demanded level of lubricant liquids, the engine will need extremely seldom performance of additional service and regenerative repair (over replacement of components subject to raised wear and expendables).

On the other hand, in case of the negligent relation to performance of procedures of regular maintenance and frequent violation of established periods of carrying out checks, efficiency of return of the engine will surely decrease sooner or later. The probability of emergence of such situation in case of acquisition of the car which was in the use is especially high. In such cases there is a need for performance of a complex of settings of the power unit over amount of works on routine maintenance of the car.

The first step at control or diagnostics of malfunctions of the engine working with lowered return always is check of kompressionny pressure in cylinders (see. Head the Engine) which analysis of results allows to estimate the general condition of internal components of the engine and to draw up the plan of the forthcoming adjusting and/or recovery operations. For example, if during carrying out check of kompressionny pressure signs of serious internal wear of the engine are revealed, a usual complex of settings will be insufficiently for correction of a situation and its performance is waste of time and means. In view of value of information received as a result of check of kompressionny pressure, it is necessary to charge its performance to rather skilled and qualified mechanic having necessary diagnostic devices.

Below lists of the main adjusting procedures, allowing to achieve maximum efficiency of return from the engine which was in a working mechanical order are provided.

List of the minimum complex of checks and adjustments

· Check levels of all concerning operation of the engine of liquids (see. Section Check of levels of liquids).
· Make cleaning and check of a condition of the storage battery (see. Section Check, service and charging of the storage battery).
· Make check of a condition and service of components of system of cooling (see. Section Check of a condition of components of system of cooling).
· Check a condition of all hoses located in an impellent compartment (see. The section Check of a condition and replacement of the hoses located in an impellent compartment).
· Check a condition and serviceability of functioning of the PCV valve (see. The section Check and replacement of the valve of system of operated ventilation of a case (PCV)).
· Check a condition of a filtering element of an air purifier (see. The section Replacement of a filtering element of an air purifier).
· Check a condition of spark plugs (see. Section Check of a condition and replacement of spark plugs).
· Check a condition of VV of wires, covers and a distributor begunka (see. Head engine Electric equipment).
· Check installation of klapanny gaps, in case of need make the corresponding adjustment (see. The section Check and adjustment of gaps of valves - only Mirage).
· Check installation of turns of idling, in case of need make the corresponding adjustment (see. Heads Engine and Power supply systems and release).
· Check installation of a corner of an advancing of ignition, in case of need make the corresponding adjustment (see. Section Check/adjustment of installation of a corner of an advancing of ignition).
· Check a condition and effort of a tension of driving belts, in case of need make necessary adjustment (see. Section condition Check, adjustment of effort of a tension and replacement of driving belts).

List of a full complex of checks and adjustments

In addition to the checks listed above:

· Check a condition and serviceability of functioning of EGR system (see. Head of the Control system of the engine).
· Replace the PCV valve (see. The section Check and replacement of the valve of system of operated ventilation of a case (PCV)).
· Replace filtering element of an air purifier (see. The section Replacement of a filtering element of an air purifier).
· Check serviceability of functioning of a power supply system and a condition of its components (see. Section Check of a condition of components of a power supply system).
· Replace the fuel filter (see. Section Replacement of the fuel filter).
· Replace wire VV, a cover and a begunok of the distributor of ignition (see. Head engine Electric equipment).
· Check serviceability of functioning of system of ignition and a condition of its components (see. Head engine Electric equipment).
· Check serviceability of functioning of system of a charge and a condition of its components (see. Head engine Electric equipment).