Mitsubishi Galant

1990 — 2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
- Settings and routine maintenance
   Schedule of routine maintenance of Mitsubishi Galant/Mirage/Diamante cars
   Specifications
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Replacement of impellent oil and oil filter
   Check, service and charging of the storage battery
   Check of a condition of components of system of cooling
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition and replacement of brushes of screen wipers
   Rotation of wheels
   Check of a condition of components of a suspension bracket and steering drive
   Greasing of components of the chassis
   Replacement of ATF of automatic transmission and differential of the main transfer, check of a condition and AT filter service
   Check of a condition of brake lines
   Check condition/service of disk brake mechanisms
   Check of a condition of protective covers of power shafts
   Check and adjustment of gaps of valves - only Mirage
   Replacement of a filtering element of an air purifier
   Service of system of cooling
   Replacement of the fuel filter
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Check of a condition and replacement of spark plugs
   Condition check, adjustment of effort of a tension and replacement of driving belts
   Check of a condition of components of system of production of the fulfilled gases
   RKPP transmission oil replacement
   Replacement of greasing of a transfer case - only all-wheel drive Galant
   Replacement of greasing of back differential - only all-wheel drive Galant
   Check condition/service of drum-type brake mechanisms
   Check of serviceability of functioning of the parking brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check of a condition of seat belts
   Check of a condition and replacement of components of system of ignition
   Check/adjustment of installation of a corner of an advancing of ignition
   Check of a condition of components of system of catching of fuel evaporations
   Check of a condition of components of a power supply system
   Check of a condition and belt replacement GRM drive (it)
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Check of a condition of brake lines

 PERFORMANCE ORDER

1. Check of a condition of metal lines and flexible hoses of brake system should be made on a regular basis according to the schedule of routine maintenance of the car.
2. Laid under the car bottom metal brake lines are subject to external influences and can appear are damaged by blows of the stones which are taking off from under wheels of the car. As a result of deformation or twisting passableness of the metal line can partially or be broken completely. Attentively examine tubes of both brake contours, in a case replace defective sections, pump over a hydraulic path.
3. Flexible brake hoses should be checked on existence of cracks, swellings and signs of damage of a reinforcing cover. Defective hoses are subject to replacement without fail.
4. At a detachment of lines of brake system it is necessary to give special attention to purity observance, - before an otpuskaniye of shtutserny sockets carefully wipe them pure rags, - hit to the highway of dirt or moisture can lead to dangerous decrease in efficiency of braking of a vehicle. Before installation replaceable sections should be washed out pure brake liquid.
5. Track reliability of fastening of brake lines and their shtutserny connections in all provided intermediate clamps.