|
1. The PCV system provides a conclusion of karterny gases via the special valve on a hose back in the inlet pipeline, from where they arrive in chambers of combustion and are burned out during normal functioning of the engine. Besides the valve into structure of system enter a hose conducting from a cover of a head of cylinders to the inlet pipeline and a hose of supply of fresh air from an air purifier under a cover of the klapanny mechanism. The PCV valve with the hose connected to it is planted in a cover of a head of cylinders.
|
|
2. At working at single turns, the heated-up engine to normal working temperature pull up the valve and take it together with the connected hose from the landing nest in a cover of a head of cylinders. |
3. Press a finger to an opening in the PCV valve - depression should be felt, otherwise make sure of passableness of a hose, the union on the inlet pipeline and actually the valve. Replace defective components.
4. Muffle the engine and shake the valve, - in good repair in the last the easy crash should be heard. If any sounds it is not audible, replace the valve.
|
|
5. For replacement of the valve disconnect it from a hose, - try to remember, how connection was organized.
|
6. Upon purchase of the new valve track that he answered on the standard size to the engine of your car. It will be most correct to compare the new valve to the old removed from the engine directly.
7. Connect the new valve to a hose.
|
|
8. Check serviceability of a condition of a rubber hose and the plug through passage. Defective components replace. |
9. Strongly plant the valve on the regular place in a cover of a head of cylinders. |
