Mitsubishi Galant

2. To wear or damage of components of a suspension bracket or a steering drive can point also such symptoms, as excessive rocking of the car at movement on the rough road or during commission of turns, jammings of a steering wheel, etc.
3. For an assessment of a condition of shock-absorbers press down one of car corners. At a corner otpuskaniye the body should come back to a starting position, making no more than one-two fluctuations. Listen to a scratch and the other extraneous noise published by a suspension bracket at oscillating motions of a body. For more details see. Head Suspension bracket and steering. Excessive quantity of raskachivaniye of a body at a corner otpuskaniye, no less than refusal of its return to a starting position, testify to need of replacement of shock-absorbers. Operating in a similar manner, serially check each of four shock-absorbers.

1. To Poddomkratta the car also establish it on props.
2. Check protectors of wheels on existence of traces of non-uniform wear (see. The section Check of a condition of tires and pressure of their rating), estimate pressure of a rating of tires.
3. Estimate a condition of kardanny hinges of a steering column. Check protective covers of the steering mechanism and power shafts on existence of signs of leakages of greasing. Check reliability of landing of tips of steering drafts. Check a condition of components and reliability of a tightening of their fixture. Estimate degree of wear of rubber components of a suspension bracket and a steering drive. Ask the assistant повращать a steering wheel and visually estimate size люфта a steering drive. Try to establish the reason of a taking place weak point, make necessary regenerative repair, or replace defective components.

4. Manually rotating forward wheels, try to define aurally a condition of wheel bearings, make sure of absence люфта at rotation of wheels. Grasp a wheel in points on 12 and at 6 o'clock and pull it in the axial plane, - existence of a little appreciable free wheeling testifies to weakening of a pretightness of wheel bearings. In case of need disassemble naves for a visual assessment of a condition of bearings and than stuffing them is fresher greasing. Full information on a design of stupichny assemblies and wheel bearings all-wheel drive models is provided in Head the Suspension bracket and a steering.

5. Hooking components mount, estimate a condition of bearings of assemblies of rotary fists. In case of identification люфта it is necessary to subject bearings to more detailed studying, to make replacement or stuffing by their fresh greasing.
6. Estimate degree of wear of universal hinges and sliding couplings of driveshafts (see. Head Coupling and transmission line).
7. Examine surfaces of cases of differential and a transfer case on existence of signs of development of leaks.