|
1. Make on the car short (lasting about 15 minutes) a trip for an oil warming up in a transfer case, - whenever possible include an all-wheel drive mode, try to banish the car on all possible high-speed modes, including movement by a backing.
2. To Poddomkratta the car also establish it on props.
3. Get under a transfer case drain capacity of suitable volume.
|
|
4. Turn out at first jellied, then drain jams of a case of a transfer case and merge oil in the prepared container. |
5. After the effluence of oil will stop, wipe a drain stopper, screw it on a place and tighten with demanded effort (32 Nanometers).
6. Chrez a jellied/control opening add in a box necessary amount of fresh oil of a demanded grade, - oil should start to follow too much openings.
7. Screw a stopper on a place and tighten with demanded effort (32 Nanometers). Lower the car on the earth.
8. Make on the car a short trip after which once again check greasing level in a transfer case. |