The device, service, repair of Mitsubishi Galant (1990 — 2001) - Check of a condition and replacement of brushes of screen wipers//Mitsubisi Galant /

Mitsubishi Galant

1990 — 2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
- Settings and routine maintenance
   Schedule of routine maintenance of Mitsubishi Galant/Mirage/Diamante cars
   Specifications
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Replacement of impellent oil and oil filter
   Check, service and charging of the storage battery
   Check of a condition of components of system of cooling
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition and replacement of brushes of screen wipers
   Rotation of wheels
   Check of a condition of components of a suspension bracket and steering drive
   Greasing of components of the chassis
   Replacement of ATF of automatic transmission and differential of the main transfer, check of a condition and AT filter service
   Check of a condition of brake lines
   Check condition/service of disk brake mechanisms
   Check of a condition of protective covers of power shafts
   Check and adjustment of gaps of valves - only Mirage
   Replacement of a filtering element of an air purifier
   Service of system of cooling
   Replacement of the fuel filter
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Check of a condition and replacement of spark plugs
   Condition check, adjustment of effort of a tension and replacement of driving belts
   Check of a condition of components of system of production of the fulfilled gases
   RKPP transmission oil replacement
   Replacement of greasing of a transfer case - only all-wheel drive Galant
   Replacement of greasing of back differential - only all-wheel drive Galant
   Check condition/service of drum-type brake mechanisms
   Check of serviceability of functioning of the parking brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check of a condition of seat belts
   Check of a condition and replacement of components of system of ignition
   Check/adjustment of installation of a corner of an advancing of ignition
   Check of a condition of components of system of catching of fuel evaporations
   Check of a condition of components of a power supply system
   Check of a condition and belt replacement GRM drive (it)
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Check of a condition and replacement of brushes of screen wipers

 PERFORMANCE ORDER

1. The condition of assemblies of cleaners of a windscreen should be checked regularly according to the schedule of routine maintenance of the car (see. Undressed the Schedule of routine maintenance of Mitsubishi Galant/Mirage/Diamante cars). Brushes look round on existence of mechanical damages, signs of weakening of fastening of components and wear of rubber working elements.
2. On working surfaces of brushes the road film that leads to appreciable decrease in efficiency of functioning of screen wipers over time accumulates. Regularly wash out brushes cleaning solution of average concentration.
3. In the course of functioning of screen wipers there can be a gradual spontaneous otdavaniye of fixture, reliability of landing and which tightening also should be checked regularly.
4. At identification of cracks or signs of wear of rubber working elements their replacement is made.

5. Take away the screen wiper lever from glass. Delay up a lock uvula and remove a nozzle of fastening of a brush from the lever (lead) of assembly. On accompanying illustrations examples конструктивов some used on models of cars of shchetochny assemblies considered in the real Management are presented.


6. Take a working element of a brush from a metal/polymeric frame.

7. Installation is made upside-down. Track reliability of fixing of a brush on the screen wiper lever.