|
1. Make on the car short (lasting about 15 minutes) a trip for an oil warming up in differential. To Poddomkratta the car also establish it on props.
2. Get under differential drain capacity of suitable volume.
|
|
3. Turn out at first jellied/control, then drain jams from the lower part of a case of differential and merge oil in the prepared container. |
4. After the effluence of oil will stop, feel a drain stopper on existence podlipshy to it metal sawdust, then wipe it, screw on a place and tighten with demanded effort (32 Nanometers).
|
|
Presence on a stopper of sawdust testifies to wear of internal components of the assembly which condition should be checked at the first possibility. |
5. By means of the manual pump, a syringe or a funnel fill in differential through a jellied/control opening necessary amount of fresh oil of a demanded grade, - level of oil should reach the bottom cut of an opening.
6. Screw a jellied/control stopper on a place and tighten it with demanded effort (32 Nanometers). Lower the car on the earth.
7. Make on the car a short trip after which once again check greasing level in differential. |
