Mitsubishi Galant

1990 — 2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
+ Settings and routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Manual transmission
- Coupling and transmission line
   Specifications
   Coupling - the general information and check of a condition of components
   Removal, check of a condition and installation of components of assembly of coupling
   Removal, check of a condition and installation of the vyzhimny bearing and fork of switching off of coupling
   Check of a condition and replacement of the directing bearing
   Adjustment of a pedal of coupling
   Adjustment of a cable of a drive of coupling, removal and installation of hummock assembly (the Mirage model with a hummock drive of coupling)
   Removal and installation of the main cylinder of coupling
   Removal and installation of the executive cylinder of coupling
   Air removal from a hydraulic path of a drive of switching off of coupling
   Removal and installation of power shafts
   Hinges of power shafts - the general information and service
   Check of a condition of the transmission line
   Removal and driveshaft installation
   Replacement of the kardanny hinge
   Driveshaft balancing
   Removal and installation of assembly of the central bearing of the driveshaft
   Removal and installation of back semi-axes (the AWD Galant model for 1993 вып.)
   Removal and installation of a stupichny pin of a back axis, wheel bearing and epiploon
   Replacement of an epiploon of a leading gear wheel of back differential
   Removal and installation a case of back differential (the AWD Galant model for 1993 вып.)
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Check of a condition of the transmission line

 PERFORMANCE ORDER

1. The driveshaft is used only on all-wheel drive (AWD) models (among a considered row it is the Galant AWD models for 1993 вып.) also serves for transfer of a torque of the engine to back wheels of the car.
2. To Poddomkratta a car back also establish it on props, prop up forward wheels protivootkatny boots.
3. Having appropriated for the car, visually estimate a driveshaft condition. In case of identification of deformations and cracks replace a shaft.
4. Check the forward and back ends of a shaft on existence of signs of development of leaks. In case of need make replacement of the corresponding epiploon (ов).
5. Without getting out from under the car, ask the assistant повращать back wheels of the car, having caused thereby driveshaft rotation, - hinges should be turned freely and silently. Estimate a condition of a rubber element of assembly of the central bearing, replace defective components.
6. The condition of kardanny hinges can be checked and at a motionless shaft, - strongly grasp each of sections of the hinge and try повращать them from each other, - existence a little appreciable люфта testifies to wear of internal components of sharnirny assembly.
7. In summary estimate reliability of a tightening of fixing bolts of a connecting flange and assembly of the central bearing.
8. On all-wheel drive models in a similar manner estimate a condition of the forward driveshaft. Check shaft on existence of leaks through epiploons of sliding couplings.
9. Taking an opportunity check also on existence of signs of leaks driving shaft/semi-axes of driving wheels. Estimate a condition of protective covers of hinges of equal angular speeds. In case of need make replacement of epiploons of differential.