Mitsubishi Galant

1990 — 2001 of release

Repair and car operation


Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
+ Settings and routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Search of causes of failures of electric equipment
   Electric sockets - general information
   Protection of electric contours
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Removal and installation of the podrulevy combined switches and the switch of the lock of ignition
   Removal and installation of switches
   Removal and installation of block headlights of tight type
   Adjustment of the direction of optical axes of head headlights
   Replacement of lamps of lighting devices
   Removal and installation of a combination of devices
   Replacement of measuring instruments of a combination of devices
   Control system of speed (темпостат) - the general information and problem diagnostics
   System of additional safety (SRS) - the general information and precautionary measures
   Removal and radio tape recorder/CD-проигрывателя installation
   Removal and CD changer installation
   Removal and installation of loudspeakers
   Removal and installation of levers of screen wipers
   Removal and installation of the electromotor of a drive of screen wipers
   Schemes of electric connections - the general information
   + Schemes of electric connections

Removal and installation of switches

Switch of management of functioning of cleaners of a windscreen

The switch is a part of assembly of the right podrulevy switch, - see. Head Suspension bracket and steering.

Switch of management of functioning of a screen wiper of back glass

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Having hooked the suitable tool, release lock uvulas and accurately liberate the switch from the dashboard.
3. Disconnect electroconducting and remove the switch from the car.
4. Installation is made upside-down.

Switch of management of a mode of functioning of running fires

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!


2. Having hooked a screw-driver or other suitable tool, release the assemblies located on each side clamps and accurately separate the panel of facing of the switch.

3. Remove facing assembled with the switch from the car dashboard.

4. Disconnect electroconducting and remove the switch.

5. Installation is made upside-down.


Switch of a choice of a mode of functioning of head headlights

The switch is a part of assembly of the left podrulevy switch, - see. Head Suspension bracket and steering.

Switch of management of functioning темпостата

The switch is a part of assembly of the left podrulevy switch, - see. Head Suspension bracket and steering.

Switch of management of functioning of indexes of turns

The switch is a part of assembly of the left podrulevy switch, - see. Head Suspension bracket and steering.