Mitsubishi Galant

1990 — 2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
+ Settings and routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Search of causes of failures of electric equipment
   Electric sockets - general information
   Protection of electric contours
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Removal and installation of the podrulevy combined switches and the switch of the lock of ignition
   Removal and installation of switches
   Removal and installation of block headlights of tight type
   Adjustment of the direction of optical axes of head headlights
   Replacement of lamps of lighting devices
   Removal and installation of a combination of devices
   Replacement of measuring instruments of a combination of devices
   Control system of speed (темпостат) - the general information and problem diagnostics
   System of additional safety (SRS) - the general information and precautionary measures
   Removal and radio tape recorder/CD-проигрывателя installation
   Removal and CD changer installation
   Removal and installation of loudspeakers
   Removal and installation of levers of screen wipers
   Removal and installation of the electromotor of a drive of screen wipers
   Schemes of electric connections - the general information
   + Schemes of electric connections


Removal and installation of loudspeakers

Details of installation of forward loudspeakers

1 — the Loudspeaker

2 — the Contact socket


Details of installation of door VCh of loudspeakers

1 — the Decorative slip
2 — VCh the loudspeaker
3 — the Panel of an internal upholstery of a door
4 — the Decorative lattice

5 — the Cover
6 — the Loudspeaker
7 — the Assembly arm of a loudspeaker


Details of typical installation of back loudspeakers

1 — the Decorative lattice
2 — the Loudspeaker

3 — the Back shelf


Forward loudspeakers

Removal

 PERFORMANCE ORDER

1. Forward loudspeakers are built in from above in the car dashboard. Details of installation of forward loudspeakers are shown on an accompanying illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

3. Remove a decorative lattice of a forward loudspeaker.
4. Release clamps, disconnect electroconducting and take a loudspeaker from the dashboard. Act extremely carefully, - try not to damage a loudspeaker membrane.


Installation

 PERFORMANCE ORDER

Installation is made upside-down.


Door loudspeakers

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Remove the panel of an internal upholstery of a door (see. Head Body).

3. Turn out fixing screws, liberate a loudspeaker from the landing nest in a doorframe and disconnect from it electroconducting. Act extremely carefully, - try not to damage a loudspeaker membrane.


Installation

 PERFORMANCE ORDER

Installation is made upside-down.


Door high-frequency loudspeakers

Removal

 PERFORMANCE ORDER

1. Details of VCh installation of the door loudspeaker are shown on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

3. Turn out fixing screws
4. Liberate the loudspeaker from a landing nest and disconnect from it electroconducting.


Installation

 PERFORMANCE ORDER

Installation is made upside-down


Back loudspeakers

Removal

 PERFORMANCE ORDER

1. Back loudspeakers are usually mounted on the back shelf of salon, details of their installation are shown on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

3. Remove a decorative lattice of a loudspeaker.
4. Turn out fixing screws.
5. Liberate a loudspeaker from a landing opening in the back shelf.
6. Disconnect electroconducting and remove a loudspeaker.


Installation

 PERFORMANCE ORDER

Installation is made upside-down.