Mitsubishi Galant

1990 — 2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
+ Settings and routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Search of causes of failures of electric equipment
   Electric sockets - general information
   Protection of electric contours
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Removal and installation of the podrulevy combined switches and the switch of the lock of ignition
   Removal and installation of switches
   Removal and installation of block headlights of tight type
   Adjustment of the direction of optical axes of head headlights
   Replacement of lamps of lighting devices
   Removal and installation of a combination of devices
   Replacement of measuring instruments of a combination of devices
   Control system of speed (темпостат) - the general information and problem diagnostics
   System of additional safety (SRS) - the general information and precautionary measures
   Removal and radio tape recorder/CD-проигрывателя installation
   Removal and CD changer installation
   Removal and installation of loudspeakers
   Removal and installation of levers of screen wipers
   Removal and installation of the electromotor of a drive of screen wipers
   Schemes of electric connections - the general information
   + Schemes of electric connections





Replacement of lamps of lighting devices

The map of used lamps and the scheme of an arrangement of lighting devices are provided in Specifications to the present Chapter.


Head headlights of the combined type

 PERFORMANCE ORDER

In head headlights lamps of halogen type can be used. Downloaded in flasks of such lamps gas is under pressure that demands extra care in the address with a headlight, casual damage of a flask can lead to hit of splinters in eyes. At service of halogen headlights strictly adhere to the following recommendations:

· Start a lamp reversing only after its final cooling. Do not include a headlight before completion of procedure of replacement of lamps;
· Replacement of lamps carry out in goggles;
· At replacement of lamps avoid a touch to their flasks, - try to hold a lamp only for a socle;
· Try not to shake lamps and not to drop them;
· Try not to allow hits on a dirt and moisture flask;
· The failed lamps before utilization place in regular cardboard packing from under a new lamp.


Removal

 PERFORMANCE ORDER

1. Open a cowl and prop up it in open situation.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!


3. Having turned clockwise and having pulled outside, uncover a lampoderzhatel.

4. Carefully turning counter-clockwise, take from a headlight casing a cartridge with a lamp.

5. Holding a lamp for a socle, liberate it from the boss.


Installation

 PERFORMANCE ORDER

1. Holding a lamp for a socle, accurately fill it in a cartridge.
2. Plant assembly in a casing of a block headlight and, having turned, reliably it block.
3. Having pressed and having turned counter-clockwise, establish into place a protective cover of a lampoderzhatel. Make sure of reliability of landing of a cover in order to avoid hit in assembly of moisture or violation of focusing of light beams.
4. Connect a negative wire to the battery and check serviceability of functioning of head headlights.


Forward parking and marker lights

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Remove limiting access to the corresponding lamp components.

3. Turn a lampoderzhatel counter-clockwise and take it from the seat.

4. For lamp liberation from the boss pull it along the axis.


Installation

 PERFORMANCE ORDER

Installation is made upside-down. Do not forget to connect a negative wire to the battery and to check serviceability of functioning of lighting devices.


Forward indexes of turns

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!


2. Turn out two screws of fastening of a lens of the index of turn.

3. Liberate index assembly from the body panel.

4. Turn a lampoderzhatel counter-clockwise and take it from index assembly.

5. For lamp liberation from the boss pull it along the axis.


Installation

 PERFORMANCE ORDER

Installation is made upside-down. Do not forget to connect a negative wire to the battery and to check serviceability of functioning of lighting devices.


Back indexes of turns, stoplights and marker lights

Removal


 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Open a door a back/cover of a luggage compartment. Disconnect the corresponding electroconducting, release clamps and remove the back panel of furnish of assembly of the corresponding back combined lamp.

3. Having turned, liberate the corresponding lampoderzhatel from a casing of lantern assembly.

4. For lamp liberation from the boss press it down and turn on 1/8 turns counter-clockwise. Having pulled, take a lamp from a lampoderzhatel.


Installation

 PERFORMANCE ORDER

Installation is made upside-down. Do not forget to connect a negative wire to the battery and to check serviceability of functioning of lighting devices.


Backing fires

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Open a cover of a luggage compartment.

3. At the corresponding complete set remove the finishing panel established from the interior of a cover of a luggage compartment.

4. Turn a lampoderzhatel on 1/4 turns counter-clockwise and liberate it from assembly of the corresponding lamp.

5. For lamp liberation from the boss pull it along the axis.


Installation

 PERFORMANCE ORDER

Installation is made upside-down. Do not forget to connect a negative wire to the battery and to check serviceability of functioning of lighting devices.


Lateral marker lights

Removal

 PERFORMANCE ORDER

1. Turn out two fixing screws and remove assembly of the corresponding lamp from the body panel of the car.

2. Turn a lampoderzhatel counter-clockwise and liberate it from lantern assembly.

3. For lamp liberation from the boss pull it along the axis.


Installation

 PERFORMANCE ORDER

Installation is made upside-down.


Stoplights of the top level

Galant 1994 ÷ 1998 models of вып.

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!


2. Open a cover of a luggage compartment and disconnect electroconducting from assembly of a stoplight of the top level, - access to a stoplight opens from under the back salonny shelf.

3. Turn out fixing screws and take a lampoderzhatel from stoplight assembly.

4. Having slightly pressed, turn a lamp clockwise and liberate a lamp from the boss.


Installation

 PERFORMANCE ORDER

Installation is made upside-down. Do not forget to connect a negative wire to the battery and to check serviceability of functioning of lighting devices.


The Mirage models for 1996 вып, Galant for 1993 вып. and Diamante 1992 ÷ 1996 of вып.

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. On the Mirage and Galant models release square clamps or fixing bolts and remove from assembly of a stoplight of the top level a cover.
3. On the Diamante models for removal of a cover it is necessary to wring out accurately in its lateral, which.
4. Press a lamp inside, turn it clockwise and take from the boss of a lampoderzhatel.


Installation

 PERFORMANCE ORDER

Installation is made upside-down. Do not forget to connect a negative wire to the battery and to check serviceability of functioning of lighting devices.


The Mirage models since 1997 вып., Galant since 1999 вып. and Diamante since 1997 вып.

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Open a cover of a luggage compartment and disconnect electroconducting from assembly of a stoplight of the top level, - access to a stoplight opens from under the back salonny shelf.
3. Turn a lampoderzhatel counter-clockwise and liberate it from lantern assembly.
4. Having slightly pressed, turn a lamp clockwise and liberate a lamp from the boss.


Installation

 PERFORMANCE ORDER

Installation is made upside-down. Do not forget to connect a negative wire to the battery and to check serviceability of functioning of lighting devices.


Lamps of illumination of registration plate

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!


2. Turn out two screws of fastening of a lens of a lamp of illumination of registration plate.

3. Remove a lens from a back wall of a cover of a luggage compartment.

4. Having pulled on itself, take a lamp from the boss of a lampoderzhatel.


Installation

 PERFORMANCE ORDER

Installation is made upside-down. Do not forget to connect a negative wire to the battery and to check serviceability of functioning of lighting devices.


Salonnye lamps

Removal

 PERFORMANCE ORDER

1. Having accurately hooked a small screw-driver, remove a plafond of the corresponding lamp.

2. Liberate a lamp from spring contacts.

If the lamp is equipped with cone-shaped socles, slightly wring out a lock clamp / a contact spring.


Installation

 PERFORMANCE ORDER

1. Check a condition of working surfaces of contacts, in case of need make their cleaning.
2. Installation is made upside-down. Track reliability of fixing of a lamp in the boss.
3. In summary make sure of serviceability of functioning of lamps, then establish into place a plafond.


Lamps of illumination of an instrument guard

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Remove a combination of devices (see. Section Removal and installation of a combination of devices).

3. Turn a lampoderzhatel of a lamp needing replacement counter-clockwise and remove it from assembly of a combination of devices.

4. For lamp liberation from the boss pull it along the axis.


Installation

 PERFORMANCE ORDER

1. Installation is made upside-down, - in case of need transfer a color cap on a new lamp.

2. Do not forget to connect a negative wire to the battery and to check serviceability of functioning of lighting devices.