Mitsubishi Galant

1990 — 2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
+ Settings and routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Search of causes of failures of electric equipment
   Electric sockets - general information
   Protection of electric contours
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Removal and installation of the podrulevy combined switches and the switch of the lock of ignition
   Removal and installation of switches
   Removal and installation of block headlights of tight type
   Adjustment of the direction of optical axes of head headlights
   Replacement of lamps of lighting devices
   Removal and installation of a combination of devices
   Replacement of measuring instruments of a combination of devices
   Control system of speed (темпостат) - the general information and problem diagnostics
   System of additional safety (SRS) - the general information and precautionary measures
   Removal and radio tape recorder/CD-проигрывателя installation
   Removal and CD changer installation
   Removal and installation of loudspeakers
   Removal and installation of levers of screen wipers
   Removal and installation of the electromotor of a drive of screen wipers
   Schemes of electric connections - the general information
   + Schemes of electric connections


Removal and installation of a combination of devices

Models of cars considered in the real Management are equipped with system of additional safety (SRS). Before starting performance of any works near the block of a safety cushion, a steering column or the dashboard, disconnect SRS in order to avoid receiving traumas at its casual operation (see. The section System of additional safety (SRS) - the general information and precautionary measures). Electroconducting of a chain of SRS is easy for distinguishing on yellow color of isolation.


Mirage models

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Remove the central section of furnish of the dashboard.
3. Remove a knee emphasis.
4. Remove facing of an instrument guard.
5. Dismantle a combination of devices and remove from it measuring instruments needing replacement / control lamps (see. Section Replacement of measuring instruments of a combination of devices).

At speedometer removal on models with a hummock drive of the last the nozzle of a cable is disconnected from a measuring instrument by its povorachivaniye to the right or to the left.


Installation

 PERFORMANCE ORDER

1. Installation is made upside-down, - try not to damage the printed-circuit board and measuring instruments of a combination of devices.
2. In summary connect a negative wire to the battery and check serviceability of functioning of all measuring instruments of an instrument guard.


Galant models

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Turn out two fixing screws, and carefully remove from the dashboard a combination peak.

3. Turn out four fixing screws and remove a combination of devices assembled with facing.

On some models need of a detachment from a combination of electroconducting is absent, - the printed-circuit board is equipped with the shtyrevy sockets which are automatically connected at its installation.

4. Dismantle facing and remove measuring instruments needing replacement / control lamps (see. Section Replacement of measuring instruments of a combination of devices).

At speedometer removal on models with a hummock drive of the last the nozzle of a cable is disconnected from a measuring instrument by its povorachivaniye to the right or to the left.


Installation

 PERFORMANCE ORDER

1. Installation is made upside-down, - try not to damage the printed-circuit board and measuring instruments of a combination of devices.
2. In summary connect a negative wire to the battery and check serviceability of functioning of all measuring instruments of an instrument guard.


Diamante models

Removal

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Remove from the knee emphasis located under a steering column switches and the handle of a drive of an otpuskaniye of the lock of a cowl. Turn out the opened screws and remove an emphasis.
3. Remove the top and bottom sections of a casing of a steering column.
4. Remove facing of an instrument guard.
5. Dismantle a combination of devices and remove from it measuring instruments needing replacement / control lamps (see. Section Replacement of measuring instruments of a combination of devices).

At speedometer removal on models with a hummock drive of the last the nozzle of a cable is disconnected from a measuring instrument by its povorachivaniye to the right or to the left.


Installation

 PERFORMANCE ORDER

1. Installation is made upside-down, - try not to damage the printed-circuit board and measuring instruments of a combination of devices.
2. In summary connect a negative wire to the battery and check serviceability of functioning of all measuring instruments of an instrument guard.