Mitsubishi Galant

1990 — 2001 of release

Repair and car operation

Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
+ Settings and routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Search of causes of failures of electric equipment
   Electric sockets - general information
   Protection of electric contours
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Removal and installation of the podrulevy combined switches and the switch of the lock of ignition
   Removal and installation of switches
   Removal and installation of block headlights of tight type
   Adjustment of the direction of optical axes of head headlights
   Replacement of lamps of lighting devices
   Removal and installation of a combination of devices
   Replacement of measuring instruments of a combination of devices
   Control system of speed (темпостат) - the general information and problem diagnostics
   System of additional safety (SRS) - the general information and precautionary measures
   Removal and radio tape recorder/CD-проигрывателя installation
   Removal and CD changer installation
   Removal and installation of loudspeakers
   Removal and installation of levers of screen wipers
   Removal and installation of the electromotor of a drive of screen wipers
   Schemes of electric connections - the general information
   + Schemes of electric connections

Removal and installation of levers of screen wipers

The procedure given below is made for levers of cleaners of a windscreen. Removal and installation of elements of a back screen wiper on the Versatile person Diamante models and Mirage the Hatchback are made in a similar manner.



1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Remove a protective cap and give a nut of fastening of the lever of a screen wiper.

3. Remove the lever from a spindle of a rotary axis.


Pay attention to marking of levers, - driver's assembly is marked with letters of D or Dr, passenger - And or As. Marking is put in the lower part of the basis of the lever.


1. Plant the screen wiper lever on a spindle of a rotary axis of the driving mechanism, - track, that brushes of the established screen wipers were in parking situation at distance about 2.5 cm from a facing molding.
2. Screw a fixing nut and tighten it with demanded effort (14 ÷ 19 H • м).
3. Connect a negative wire to the battery and check serviceability of functioning of screen wipers.