Mitsubishi Galant

1990 — 2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
+ Settings and routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of lateral doors
   Removal, installation and adjustment of provision of a cowl
   Removal, installation and adjustment of provision of a door of a back (Hatchback models and Versatile person)
   Removal, installation and adjustment of provision of a cover of a luggage compartment (Sedan model)
   Removal and installation of door rear-view mirrors
   Replacement of the aerial of a radio receiver
   Removal and installation of forward wings
   Removal and dashboard installation
   Removal and installation of the central console
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of the external handle of a door and elements of a drive of a latch of the lock
   Removal and installation of the cylinder of the lock of a lateral door
   Removal and installation of the cylinder of the lock of a door of a back/cover of a luggage compartment
   Removal and installation of the handle of a door of a back
   Removal and installation of door glass and window regulator regulator
   Removal and installation of the electromotor of a drive of a window regulator
   Replacement of a salonny rear-view mirror
   Removal and installation of seats
   Removal and installation of the electromotor of a drive of a seat
+ Onboard electric equipment





Removal, installation and adjustment of provision of a door of a back (Hatchback models and Versatile person)

Details of installation tear up a back on the Diamante Wagon models

1 — the Damper
2 — the Pillow
3 — the Emphasis
4 — the Sealing tape
5 — the Slip
6 — the lock Drummer

7 — Burn down electroconductings with the plug through passage
8 — the Tube of a stekloomyvatel
9 — the Top furnish of a door
10 — the Socket of an antenna cable and the grounding screw
11 — Door assembly
12 — the Loop


The Hatchback models (Mirage for 1992 вып.)

Removal

 PERFORMANCE ORDER

1. Having turned out fixing screws or bolts, disconnect an emphasis of a door of a back.
2. Disconnect a tube of a washer of back glass.
3. Disconnect the corresponding electroconducting.
4. Close a door of a back and from salon of the car release nuts of fastening of loopy levels.
5. By means of the assistant carefully remove door assembly.


Installation and adjustment

 PERFORMANCE ORDER

1. Establish a door on the regular place and by hand tighten loopy nuts.
2. Establish a door emphasis.
3. Close a door and check correctness of its situation in a body aperture. In case of need correct as appropriate loopy levels, then tighten fixture with demanded effort (15 H • м).
4. Restore initial connection of electroconducting.
5. Connect a tube of supply of liquid of washing of back glass, - track reliability of fixing of a tube on the union.
6. Check serviceability of operation of a latch of the lock. In case of need release fixture and as appropriate correct position of the drummer.
7. Check density of closing of a door, in case of need twist as appropriate a rubber emphasis.


Models Versatile person (Diamante)

Removal

 PERFORMANCE ORDER

1. Details of installation of a door of a back on models the Versatile person (Wagon) are shown on an illustration.
2. Remove a door emphasis.
3. Disconnect a tube of supply of liquid of washing of back glass.
4. Disconnect the corresponding electroconducting.
5. Ask the assistant to hold a door and give fastening nuts to a doorframe of loopy levels.
6. Remove a door from the car.


Installation and adjustment

 PERFORMANCE ORDER

1. Installation is made upside-down. Track, that fixing nuts were tightened with demanded effort (14 H • м).
2. Check correctness of placement of a door in a body aperture. In case of need release nuts of fastening of loopy levels and make the corresponding adjustment.
3. Check serviceability of functioning of a latch of the lock. In case of need adjust position of the drummer.