Mitsubishi Galant

1. Details of installation of forward seats are shown on й to an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

3. If, at the corresponding complete set of the car, failure of the driving electromotor takes place, the seat is necessary for shifting manually for the purpose of ensuring access to fixture elements. Release bolts of fastening of a driving box by the left and right ends of directing runners. Remove a power shaft on the left side and delay a box to the right on itself., then disconnect transfer from a lateral runner. Manually shift a seat so that access to fixture elements opened.
4. Remove decorative covers of anchor bolts.
5. At the corresponding complete set disconnect the corresponding electroconducting.
6. Give fixing bolts/nuts, remove a seat and take it from car salon.

1. Establish a seat on the regular place, - track correctness of blocking of regulators from both parties of a seat.
2. At first temporarily tighten forward fixing nuts, then - back bolts.
3. In the same order finally tighten fixture with demanded effort (30 H • м: nuts and 44 H • м: bolts).
4. Establish decorative covers of anchor bolts.
5. At the corresponding complete set restore initial connection of electroconducting.
6. Connect a negative wire to the battery.

Establish a pillow on the regular place and densely press. Make sure of reliability of fixing of a pillow lock brackets.

1. Remove a pillow of a back seat (see above).

2. Release fixing bolts/nuts, remove the corresponding back of a back seat and take it from car salon.

1. Establish a back on the regular place and tighten fixing bolts/nuts with demanded effort (22 H • м).
2. Establish into place a seat pillow.