Mitsubishi Galant

1990 — 2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
+ Settings and routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of lateral doors
   Removal, installation and adjustment of provision of a cowl
   Removal, installation and adjustment of provision of a door of a back (Hatchback models and Versatile person)
   Removal, installation and adjustment of provision of a cover of a luggage compartment (Sedan model)
   Removal and installation of door rear-view mirrors
   Replacement of the aerial of a radio receiver
   Removal and installation of forward wings
   Removal and dashboard installation
   Removal and installation of the central console
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of the external handle of a door and elements of a drive of a latch of the lock
   Removal and installation of the cylinder of the lock of a lateral door
   Removal and installation of the cylinder of the lock of a door of a back/cover of a luggage compartment
   Removal and installation of the handle of a door of a back
   Removal and installation of door glass and window regulator regulator
   Removal and installation of the electromotor of a drive of a window regulator
   Replacement of a salonny rear-view mirror
   Removal and installation of seats
   Removal and installation of the electromotor of a drive of a seat
+ Onboard electric equipment





Removal and installation of forward wings

Details of installation of a forward wing on the Diamante 1992 ÷ 1996 models of вып.

1 — Loker of protection of a wheel arch
2 — the turn Index / parking fire
3 — the Forward wing

4 — the Sealant
5 — the Insulator


Details of installation of a forward wing on the Diamante models since 1997 вып.

1 — Loker of protection of a wheel arch

2 — the Wing


Details of installation of a forward wing on the Galant models for 1993 вып.


Details of installation of a forward wing on the Galant 1994 ÷ 1998 models of вып.

1 — Gravel protection
2 — Loker of protection of a wheel arch
3 — Radiatornaya a lattice
4 — the turn Index
5 — Assembly of a head headlight

6 — the front Panel
7 — the Forward wing
8 — the Molding of lateral protection
9 — the Insulator


Details of installation of a forward wing on the Galant models since 1999 вып.

1 — Gravel protection

2 — Loker of protection of a wheel arch


Details of installation of a forward wing on the Mirage models for 1992 вып.

1 — Radiatornaya a lattice
2 — Loker of protection of a wheel arch
3 — the Aerial (the right wing)
4 — the Molding of lateral protection

5 — the Combined lamp
6 — the Panel of furnish of a lattice
7 — the Front bumper
8 — the Wing


Details of installation of a forward wing on the Mirage models since 1993 вып.

1 — Loker of protection of a wheel arch
2 — the turn Index
3 — the Ornament

4 — the Wing
5 — the Assembly arm


Diamante 1992 ÷ 1996 models of вып.

Removal

 PERFORMANCE ORDER

1. Details of installation of a forward wing on the Diamante 1992 ÷ 1996 models of вып. are shown on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

3. To Poddomkratta the car also establish it on props. Remove the corresponding forward wheel.
4. Remove a forward gryazeotboynik.
5. Remove a molding of lateral protection.
6. Remove a forward lateral fairing.
7. Release clamps and remove a loker of protection of a wheel arch.
8. Remove assembly of the index of turn / parking fire.
9. Turn out located along the top, bottom and back edges of a wing fixing bolts and remove the wing panel from the car.


Installation

 PERFORMANCE ORDER

Installation is made upside-down, - it is necessary to grease landing surfaces of a body before installation of a wing type 3М ATD No. 8625 hermetic. Track, that fixing bolts were tightened with demanded effort (6 H • м).


The Diamante models since 1997 вып.

Removal


 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. To Poddomkratta the car also establish it on props. Remove the corresponding forward wheel.
3. Remove a front bumper.
4. Remove a forward lateral fairing.
5. Release fixture and remove a loker of protection of a wheel arch.
6. Turn out located along the top, bottom and back edges of a wing fixing bolts and remove the wing panel from the car.


Installation

 PERFORMANCE ORDER

Installation is made upside-down, - it is necessary to grease landing surfaces of a body before installation of a wing type 3М ATD No. 8625 hermetic. Track, that fixing bolts were tightened with demanded effort (6 H • м).


The Galant models for 1993 вып.

Removal

 PERFORMANCE ORDER

1. Details of installation of a forward wing on the Galant models for 1993 вып. are shown on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

3. To Poddomkratta the car also establish it on props. Remove the corresponding forward wheel.
4. Remove wing facing.
5. Remove a molding of lateral protection.
6. Release clamps and remove a loker of protection of a wheel arch.
7. Remove a front bumper.
8. Remove assembly of the index of turn / combined fire.
9. Turn out located along the top, bottom and back edges of a wing fixing bolts and remove the wing panel from the car.


Installation

 PERFORMANCE ORDER

Installation is made upside-down, - it is necessary to grease landing surfaces of a body before installation of a wing type 3М ATD No. 8625 hermetic. Track, that fixing bolts were tightened with demanded effort (6 H • м).


Galant 1994 ÷ 1998 models of вып.

Removal

 PERFORMANCE ORDER

1. Details of installation of a forward wing on the Galant 1994 ÷ 1998 models of вып. are shown on from an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

3. To Poddomkratta the car also establish it on props. Remove the corresponding forward wheel.
4. Remove gravel protection.
5. Release clamps and remove a loker of protection of a wheel arch.
6. Remove a radiatorny lattice.
7. Remove assembly of the index of turn.
8. Remove assembly of a head headlight.
9. Remove the front panel.
10. Turn out located along the top, bottom and back edges of a wing fixing bolts and remove the wing panel from the car.


Installation

 PERFORMANCE ORDER

Installation is made upside-down, - it is necessary to grease landing surfaces of a body before installation of a wing type 3М ATD No. 8531 or 8646 hermetic. Track, that fixing bolts were tightened with demanded effort (6 H • м).


The Galant models since 1999 вып.

Removal

 PERFORMANCE ORDER

1. Details of installation of a forward wing on the Galant models since 1999 вып. are shown on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

3. To Poddomkratta the car also establish it on props. Remove the corresponding forward wheel.
4. Remove gravel protection.
5. Remove a front bumper.
6. Remove assembly of a head headlight.
7. Remove a lateral overlay of a wing.
8. Remove gravel protection.
9. Release clamps and remove a loker of protection of a wheel arch.
10. Remove an arm of a damper of a cowl.
11. Turn out located along the top, bottom and back edges of a wing fixing bolts and remove the wing panel from the car.


Installation

 PERFORMANCE ORDER

Installation is made upside-down, - it is necessary to grease landing surfaces of a body before installation of a wing type 3М ATD No. 8625 hermetic. Track, that fixing bolts were tightened with demanded effort (6 H • м).


The Mirage models for 1992 вып.

Removal

 PERFORMANCE ORDER

1. Details of installation of a forward wing on the Mirage models for 1992 вып. are shown on an illustration.
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

3. To Poddomkratta the car also establish it on props. Remove the corresponding forward wheel.
4. Remove a radiatorny lattice.
5. Release clamps and remove a loker of protection of a wheel arch.
6. Remove assembly of the aerial of a radio receiver.
7. Remove a molding of lateral protection.
8. Remove assembly of a head headlight.
9. Remove the panel of furnish of a lattice.
10. Remove a front bumper.
11. Turn out located along the top, bottom and back edges of a wing fixing bolts and remove the wing panel from the car.


Installation

 PERFORMANCE ORDER

Installation is made upside-down, - it is necessary to grease landing surfaces of a body before installation of a wing type 3М ATD No. 8625 hermetic. Track, that fixing bolts were tightened with demanded effort (6 H • м).


The Mirage models since 1993 вып.

Removal

 PERFORMANCE ORDER

1. Details of installation of a forward wing on the Mirage models since 1993 вып. are shown on an illustration.
2. Disconnect a negative wire from the battery.

 If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

3. To Poddomkratta the car also establish it on props. Remove the corresponding forward wheel.
4. Remove a front bumper.
5. Release clamps and remove a loker of protection of a wheel arch.
6. Remove assembly of the index of turn.
7. Remove a wing ornament.
8. Turn out located along the top, bottom and back edges of a wing fixing bolts and remove the wing panel from the car.


Installation

 PERFORMANCE ORDER

Installation is made upside-down, - it is necessary to grease landing surfaces of a body before installation of a wing type 3М ATD No. 8531 or No. 8646 hermetic. Track, that fixing bolts were tightened with demanded effort (6 H • м).