Mitsubishi Galant

1. For filling of system of cooling the mix of antifreeze made in due proportions on base этиленгликоля with soft water is usually used. The mix should show stability to freezing at temperatures to - 30°С, and at need and below, depending on a climatic belt of an arrangement of the region of operation of the car. Except frost resistance, antifreeze gives mixes anticorrosive properties and raises a point of its boiling.
2. Oporozhneniye and washing of system of cooling should be made according to the schedule of routine maintenance of the car (see. Head of Control and routine maintenance). Use of cooling liquid during longer term is fraught with different damages of system, development of corrosion and scaling. If tap water in the region where the car is maintained, is "rigid", i.e. differs the raised content of mineral salts, for formation of cooling liquid it is necessary to use the distilled or rain water.
3. Before adding cooling liquid in system, check reliability of fastening of hoses of the last on the unions - antifreeze possesses high fluidity and is capable to give leaks through the slightest thinnesses. During normal operation of the engine cooling liquid is not spent, therefore appreciable falling of its level is a sign of development of the external leaks which reason should be immediately found out and eliminated.
4. The exact composition of cooling liquid is defined by specific climatic conditions. Thus the content of antifreeze in a mix should not be lower than 50 % and rise above 70 % - address to the card of composition of cooling liquid which is usually put on a container label. Areometers for determination of specific weight (density) of cooling liquid can be got practically in any shop of automobile accessories. Try to use only recommended by manufacturers of the car of a grade of antifreeze (see. Specifications).