Mitsubishi Galant

1990 — 2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
+ Settings and routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
- Manual transmission
   + 5-step manual box of gear shifting (RKPP)
   + Automatic transmissions (AT)
   - Transfer case
      General information
      Replacement of a back epiploon of a transfer case
      Removal and installation of the lever of a transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Replacement of a back epiploon of a transfer case

Details of installation of a back epiploon of a transfer case

1 — the Gate of production of air
2 — the Arm of a support of a suspension bracket of a box (only models with the being blocked differential)
3 — the Dustproof casing

4 — the Epiploon
5 — the Casing of lengthening of a box


Removal

 PERFORMANCE ORDER

1. Details of installation of a back epiploon of a transfer case are shown on an illustration.
2. To Poddomkratta the car also establish it on props.
3. Disconnect from a transfer case the driveshaft. Get under a back part of a case of a transfer case drain capacity.
4. Having accurately hooked a screw-driver with the blunted flat sting, take an old epiploon from the landing nest in a dustproof casing.


Installation

 PERFORMANCE ORDER

1. Accurately plant an epiploon in a dustproof casing, - as an opravka when landing a new epiploon the face head of the corresponding size, or a piece of a pipe of suitable diameter can be used.

2. Connect to a transfer case the driveshaft.
3. Lower the car on the earth and check level of transmission oil in a transfer case (see. Head of Control and routine maintenance).