1990 — 2001 of release
Repair and car operation
+ Identification numbers of the car
+ Governing bodies
+ Settings and routine maintenance
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Onboard electric equipment
Identification numbers of the carProcess of continuous improvement of let-out production is a distinctive feature of any line production. Thus, except for cases of large constructive changes of models descending from the conveyor, results of process of updating in the operation manual on the car are not shined. However the manufacturer makes out number lists of let-out spare parts in view of what special value upon purchase of the last is gained by information coded in identification numbers of the car. Doing the order for a demanded spare detail, try to provide to the seller fuller information on the car. Surely report the model name, year of release, and also number of a body and the power unit.
Identification numbers of the car
Identification number of the engine
Identification number of transmission
The code such as transmission is beaten out on fixed on a back partition of an impellent compartment information шильде (see above). Identification number of transmission is engraved on the inflow formed in the top part of a forward wall of a case of a transmission.
Identification number of the leading bridge (only Galant AWD models)
The code of the bridge is engraved on the inflow formed on a case of differential.
Identification number of a transfer case (only Galant AWD models)
The separate code is not appropriated to a transfer case. On all-wheel drive models (AWD) number of a transfer case is located on a transmission case.
Information label of systems of decrease in toxicity (VECI)
The label of VECI contains information on an arrangement of components of systems of decrease in toxicity of the fulfilled gases, spetsifikatsionny parameters on control of separate knots and is used together with Schelde on which the scheme of laying of vacuum hoses is put. Labels usually fasten from a reverse side of a cowl. In case of loss of information or its divergence with equipment actually established on the car the new label always can be ordered in service center of the manufacturing company of the car.
MFI = System of the distributed (multiitem) injection
SOHC = the Engine with one camshaft located from above
DOHC = the Engine with two camshafts located from above
* the Code an engine/letter taking the 8th position as a part of VIN
** A letter taking the 10th position as a part of VIN