Mitsubishi Galant

1990 — 2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
+ Settings and routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
- Manual transmission
   + 5-step manual box of gear shifting (RKPP)
   + Automatic transmissions (AT)
   + Transfer case
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Manual transmission

5-step manual box of gear shifting

General parameters

Transmission type

5-step transmission of the F5М21, F5М22 or F5М31 type

Volume of transmission oil

Adjustment parameters

Axial люфт boxes of differential, mm

0.05 ÷ 0.17

Pretightness of differential, mm

0.05 ÷ 0.10

Люфт gearings of satellites, mm

0.025 ÷ 0.150 (in both parties)

Axial люфт bearings of primary shaft, mm

  • Forward bearing
0.010 ÷ 0.120
  • Back bearing
0.00 ÷ 0.09

Axial люфт bearing of an intermediate gear wheel, mm

All boxes, except F5М31

0.010 ÷ 0.140

РКПП F5Î31

0.010 ÷ 0.110

Pretightness of an intermediate shaft, mm

0.05 ÷ 0.10

Pretightness of a secondary shaft, mm

0.05 ÷ 0.10

Efforts of a tightening of carving connections of H • m

Bolts of fastening of the lever of switching to the case

9 ÷ 14

Directing choice and switching cables

9 ÷ 14

Bolt of fastening of the coupling of a drive of a speedometer

27 ÷ 44

Sensor switch of fires of a backing

30 ÷ 35

Drain stopper

30 ÷ 34

Jellied stopper

30 ÷ 35

Bolts of fastening of RKPP to the engine

  • The Mirage models for 1992 вып.
43 ÷ 55
  • The Mirage models since 1993 вып.
48
  • The Galant models for 1993 вып.
43 ÷ 55
  • The Galant models since 1994 вып.
48

Bolts of fastening of RKPP

Bolts of 12 mm

43 ÷ 53

Bolts of 10 mm

30 ÷ 35

Bolts of 6 ÷ 8 mm

Bolts of fastening of a dome of coupling

8 ÷ 10

Bottom coupling bolt of RKPP

30 ÷ 35

Bolt of the holder of the bearing

16 ÷ 22

Bolt of a leading gear wheel of differential

130 ÷ 140

Lock-nut of primary shaft

140 ÷ 160

Lock-nut of an intermediate shaft

140 ÷ 160

Bolt of a plate of a clamp

20 ÷ 27

Nut of a finger of a spherical support of the bottom lever of a suspension bracket

60 ÷ 72

Bolts of a back cover

15 ÷ 22

Bolt of an axis of an intermediate gear wheel of a reverse gear

15 ÷ 22

Bolt of a lock bracket

15 ÷ 22

Bolts of fastening of an arm of a support of a suspension bracket to RKPP case

60 ÷ 80
10 ÷ 12

Nuts of a support of a suspension bracket

48

Through bolt of a support of a suspension bracket

69

Automatic transmission

General parameters

AT type

3-step transmission of the F3А21 series, or 4-step F4A20/30/50 series

ATF volume

Card of operation of couplings of coupling and brake tapes

Position of the lever of the selector

Working elements AT

Situation "D"

  • 1st transfer
Back and one-pass couplings of coupling
  • 2nd transfer
Back coupling of coupling and brake tape of a drive of kickdown
  • 3rd transfer
Forward, back and торцевая* coupling couplings
  • 4th передача*
Face coupling of coupling and brake tape of the kickdown mode

Situation "2"

1st transfer

Back and one-pass couplings of coupling

2nd transfer

Back coupling of coupling and brake tape of a drive of kickdown

Situation "1" ("L")

1st transfer

The back coupling of coupling and brake assembly lowering transfers/reverse

Situation "R"

The forward coupling of coupling and brake assembly lowering transfers/reverse

Provision of "N" and "R"

All elements are disconnected, or involved with the minimum efficiency

Stall-dough turns

Transmission

Turns, rpm

3-step (F3А21)

1000 ÷ 2200

4-step (F4A20/30/50 series)

  • Galant
2100 ÷ 2600
  • Mirage
2500 ÷ 3000

Efforts of a tightening of carving connections of H • m

PNP sensor switch

The Mirage models for 1997 вып. and Galant for 1993 вып.

10 ÷ 12

The Mirage models since 1998 вып. and Galant since 1994 вып.

11

Diamante models

10 ÷ 12

Drain stopper

30 ÷ 34

Jellied stopper

30 ÷ 34

Nut of fastening of a cable of a drive of a butterfly valve

10 ÷ 14

Bolts of fastening of the converter of transmission

46 ÷ 53

Bolts of the holder of the bearing

17 ÷ 22

Bolts of fastening of a dome of the converter of rotation

19 ÷ 23

Bolts of fastening of a leading gear wheel of differential

130 ÷ 140

Bolts of fastening of a driving disk to the rotation converter

46 ÷ 53

Bolts of fastening of a lock plate of an axis of an intermediate gear wheel

47 ÷ 58

Nut of a manual control lever

17 ÷ 22

Bolts of the oil pump

15 ÷ 20

Fastening of the holder of planetary transfer to the one-pass coupling

35 ÷ 45

Bolt of an emphasis of a rasporny rod

20 ÷ 27

Lock-nut of a distributing shaft

200 ÷ 230

Bolts of fastening of a cover of the face coupling of coupling

6 ÷ 8

The adjusting screw of an operating regulator

8 ÷ 10

Bolt of fastening of the PNP sensor switch

8 ÷ 10

Adjusting screw of a manual control lever

8 ÷ 10

Bolts of fastening of the oil filter

5 ÷ 7

Bolts of fastening of the pallet of a case

10 ÷ 12

Bolts of fastening of pulse generators

10 ÷ 12

Bolt of fastening of a support of a jet shaft to the case of the oil pump

10 ÷ 1 2

Bolts of fastening of klapanny assembly

4 ÷ 6

Bolts of fastening of klapanny assembly to a transmission case

10 ÷ 12

Bolts of fastening of transmission to the engine

  • Diamante models
75
  • The Mirage models for 1992 вып.
43 ÷ 55
  • The Mirage models since 1993 вып.
48
  • The Galant models for 1993 вып.
43 ÷ 55
  • The Galant models since 1994 вып.
48

Moments of switching of AT

АТ F3A21 (Mirage)


AT F4A20 (Mirage)


AT F4A22 (Galant)


AT F4A23 (Galant)

Adjusting parameters

The card of pressure for 3-step transmissions (F3Ç20 series)




The card of pressure for 4-step transmissions (F3A20/30/50 series)


- 10 kPas or below; · pressure is generated, but non-standard value; the SW switch of raising transfer

The scheme of distribution of pressure of an operating regulator