Mitsubishi Galant

1990 — 2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
- Settings and routine maintenance
   Schedule of routine maintenance of Mitsubishi Galant/Mirage/Diamante cars
   Specifications
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Replacement of impellent oil and oil filter
   Check, service and charging of the storage battery
   Check of a condition of components of system of cooling
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition and replacement of brushes of screen wipers
   Rotation of wheels
   Check of a condition of components of a suspension bracket and steering drive
   Greasing of components of the chassis
   Replacement of ATF of automatic transmission and differential of the main transfer, check of a condition and AT filter service
   Check of a condition of brake lines
   Check condition/service of disk brake mechanisms
   Check of a condition of protective covers of power shafts
   Check and adjustment of gaps of valves - only Mirage
   Replacement of a filtering element of an air purifier
   Service of system of cooling
   Replacement of the fuel filter
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Check of a condition and replacement of spark plugs
   Condition check, adjustment of effort of a tension and replacement of driving belts
   Check of a condition of components of system of production of the fulfilled gases
   RKPP transmission oil replacement
   Replacement of greasing of a transfer case - only all-wheel drive Galant
   Replacement of greasing of back differential - only all-wheel drive Galant
   Check condition/service of drum-type brake mechanisms
   Check of serviceability of functioning of the parking brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check of a condition of seat belts
   Check of a condition and replacement of components of system of ignition
   Check/adjustment of installation of a corner of an advancing of ignition
   Check of a condition of components of system of catching of fuel evaporations
   Check of a condition of components of a power supply system
   Check of a condition and belt replacement GRM drive (it)
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Check of a condition of tires and pressure of their rating

 PERFORMANCE ORDER

1. The conscientious attitude to regular check of a condition of tires will allow the driver to avoid the annoying delays connected with an exit of a wheel out of operation during movement. Besides, on nature of wear of protectors it is possible to reveal beforehand the developments which were at a stage defects of components of a suspension bracket and a steering drive.

2. Entering into a standard complete set of cars considered in the real Management the wheels equipped with special display tapes, having about 12 mm and being shown on a protector pattern enter width at wear of the last to an admissible limit. The minimum admissible depth of a protector makes 1.6 mm. To estimate degree of wear of a protector it is possible by means of the special inexpensive adaptation - ask in shops of automobile accessories.

3. Pay attention to any signs of non-uniform wear of a protector. Such local defects as a chashevidny wipe, uploshcheniye, etc., are usually obliged by the emergence to violations of corners of installation of forward wheels, or balancing of the last. For identification and elimination of malfunctions the car should be driven away in a specialized workshop of car-care center or on car repair shop.

PRESSURE OF THE RATING OF THE TYRE DOES NOT SUFFICE

CHASHEVIDNYE DEFECTS

TOO HIGH PRESSURE OF THE RATING OF TYRES

CONVERGENCE ADJUSTMENT IS BROKEN, OR DISORDER OF WHEELS IS TOO GREAT

THE SCALY WEAR OF THE PROTECTOR CAUSED BY VIOLATION OF CORNERS OF INSTALLATION OF WHEELS

4. Attentively examine tires of all wheels on existence of cuts, punctures and got stuck in flutes of a pattern of a protector of extraneous subjects. Sometimes the punched wheel during even any time continues to hold in itself air in view of that the subject which has punctured the tire continues to remain thrust in it. Defect of a nipple of the gate of a rating of a wheel can be the reason of a slow spuskaniye of the tire, - check a nipple condition. Attentively examine a protector on existence of the extraneous subjects which have got stuck in it and signs of violation of tightness of landing of repair "jams" by means of which repair of small punctures of the tire is made. To make sure available a puncture rather simply, - it is enough to moisten a suspected site of a surface of the tire with solution of soap water - if the puncture takes place, solution will start to bubble. Insignificant punctures on size are usually easily eliminated in shinomontazhny workshops.

5. Attentively examine internal walls of tires of all four wheels on existence on them потеков brake liquid. In case of identification of those immediately check a condition of the corresponding brake mechanisms and the hydraulic lines connected to them.
6. Podderzhivaniye of demanded pressure of a rating of tires will allow to prolong essentially service life of wheels, besides, will provide the maximum comfort at movement and let's reduce controllability of the car. Remember that it is correct to measure pressure in the tire by eye it is almost impossible, in particular, if it is a question of tires of a radial design. It is necessary to hold constantly near at hand a suitable manometer, - on gas stations and car repair shops it is not necessary to trust indications of measuring instruments of compressors of pumping.
7. Check pressure of a rating of tires at cold wheels, - it is meant that the car passed no more than one mile within the last three hours. Remember that increase of pressure upon 0.3 ÷ 0.6 kgfs/cm2 as a result of a warming up of a wheel is quite natural phenomenon.

8. Remove from the gate of a rating of a wheel a protective cap and densely press a manometer nozzle to an exhaust outlet of the gate, having wrung out a nipple rod. Consider the read instrument and compare it to standard data, in case of need correct pressure.

9. Do not forget to screw on a place a protective cap of the gate in order to avoid hit in a moisture and dirt nipple. Check pressure in all wheels, including the spare.

Pressure of a rating запаски is usually much higher than compact type, than at usual wheels.