Mitsubishi Galant

1990 — 2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
- Settings and routine maintenance
   Schedule of routine maintenance of Mitsubishi Galant/Mirage/Diamante cars
   Specifications
   General information about settings and adjustments
   Check of levels of liquids
   Check of a condition of tires and pressure of their rating
   Replacement of impellent oil and oil filter
   Check, service and charging of the storage battery
   Check of a condition of components of system of cooling
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition and replacement of brushes of screen wipers
   Rotation of wheels
   Check of a condition of components of a suspension bracket and steering drive
   Greasing of components of the chassis
   Replacement of ATF of automatic transmission and differential of the main transfer, check of a condition and AT filter service
   Check of a condition of brake lines
   Check condition/service of disk brake mechanisms
   Check of a condition of protective covers of power shafts
   Check and adjustment of gaps of valves - only Mirage
   Replacement of a filtering element of an air purifier
   Service of system of cooling
   Replacement of the fuel filter
   Check and replacement of the valve of system of operated ventilation of a case (PCV)
   Check of a condition and replacement of spark plugs
   Condition check, adjustment of effort of a tension and replacement of driving belts
   Check of a condition of components of system of production of the fulfilled gases
   RKPP transmission oil replacement
   Replacement of greasing of a transfer case - only all-wheel drive Galant
   Replacement of greasing of back differential - only all-wheel drive Galant
   Check condition/service of drum-type brake mechanisms
   Check of serviceability of functioning of the parking brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check of a condition of seat belts
   Check of a condition and replacement of components of system of ignition
   Check/adjustment of installation of a corner of an advancing of ignition
   Check of a condition of components of system of catching of fuel evaporations
   Check of a condition of components of a power supply system
   Check of a condition and belt replacement GRM drive (it)
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Specifications

Recommended greasings and liquids

 Below greasings and the liquids recommended for application by the company manufacturer of cars at the moment of drawing up of the real Management are listed. Fresher information can be received at firm car repair shops of the company.

Type and properties of working liquids

Impellent oil

Type

Universal engine oil for petrol engines of the class SH or SJ on API

Viscosity

 The company manufacturer (Mitsubishi) recommend to use impellent SAE 5W-30 oil for all climatic conditions; in the conditions of moderate and hot belts it is allowed to apply SAE 10W-30 oil.

 Pay attention to conditions of warranty service of the new car concerning application of synthetic impellent oils!

Fuel

SOHC engines

Unleaded gasoline with octane number is not lower 87

DOHC engines

Unleaded gasoline with octane number is not lower 91

Transmission oil for RKPP

Gipoidnoye transmission SAE 75W-85W or 75W-90W oil (the class GL-4 and is higher on API)

ATF for AT

ATF Mercon®

Oil for a transfer case (all-wheel drive Galant)

 

Gipoidnoye transmission SAE 75W-85W or 75W-90W oil (the class GL-4 and is higher on API)

Oil for differential of the main transfer of the back bridge (all-wheel drive Galant)

The class GL-5 and is higher on API

  • For ambient temperatures is higher - 23°С
SAE 90, 85W-90 or 80W-90
  • For a range of temperatures from - 23°С to - 34°С
SAE 80W or 80W-90
  • For temperatures is lower - 34°С
SAE 75W

Greasing for the chassis

Universal greasing on a lithium basis of NGLI No2

 In case of a different interpretation with the data provided on a label of VECI, should give preference the last

Brake system

Minimum admissible thickness of frictional overlays of blocks of disk brake mechanisms, mm

1.6

Minimum admissible thickness of frictional overlays of boots of drum-type brake mechanisms, mm

1.6

Efforts of a tightening of carving connections, Nanometer

Hollow bolt of shtutserny connection of the top gasoline pipe line on the fuel filter

30

Cap nut of shtutserny connection of the bottom gasoline pipe line on the fuel filter

35

Bolts of fastening of the fuel filter

14

Drain stopper of a case of RKPP

30

Jellied/control stopper of a case of RKPP

Drain stopper of a case of AT

30 ÷ 35

Bolts of fastening of the AT filter on klapanny assembly

7

Bolts of fastening of the pallet of a case of AT

10 ÷ 12

Drain stopper of differential of the main transfer (model with AT)

30 ÷ 35

Drain stopper of a transfer case

32

Jellied/control stopper of a transfer case

32

Drain stopper of a case of differential of the main transfer of the back bridge (all-wheel drive Galant)

32

Jellied/control stopper of a case of differential of the main transfer of the back bridge (all-wheel drive Galant)

32

Volumes of working liquids, л*

* All volumes are specified only approximately. At adjustment be verified with urovnevy labels.