Mitsubishi Galant

1990 — 2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
+ Settings and routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Specifications
   Search of causes of failures of electric equipment
   Electric sockets - general information
   Protection of electric contours
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Removal and installation of the podrulevy combined switches and the switch of the lock of ignition
   Removal and installation of switches
   Removal and installation of block headlights of tight type
   Adjustment of the direction of optical axes of head headlights
   Replacement of lamps of lighting devices
   Removal and installation of a combination of devices
   Replacement of measuring instruments of a combination of devices
   Control system of speed (темпостат) - the general information and problem diagnostics
   System of additional safety (SRS) - the general information and precautionary measures
   Removal and radio tape recorder/CD-проигрывателя installation
   Removal and CD changer installation
   Removal and installation of loudspeakers
   Removal and installation of levers of screen wipers
   Removal and installation of the electromotor of a drive of screen wipers
   Schemes of electric connections - the general information
   + Schemes of electric connections


Removal and radio tape recorder/CD-проигрывателя installation

Removal

 PERFORMANCE ORDER

1. Disconnect SRS (see. The section System of additional safety (SRS) - the general information and precautionary measures) / disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!

2. Remove the central section of facing of the dashboard.

On some models for fastening of furnish screws, on others for liberation bottom which it is necessary to hook sections the suitable plastic tool are used.

3. Turn out screws of fastening of assembly of autoradio tape recorder/CD-проигрывателя.
4. Liberate radio tape recorder assembly from the dashboard of the car and disconnect from it electroconducting and an antenna cable).

Before a detachment electroconducting can be marked by means of an adhesive tape.

5. Remove from radio tape recorder assembly an adjusting frame.


Installation

 PERFORMANCE ORDER

1. Installation is made upside-down, - track correctness and reliability of connection of electroconducting and an antenna cable.
2. Connect a negative wire to the battery and check serviceability of functioning of an audiosystem.