Mitsubishi Galant

1990 — 2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
+ Settings and routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission line
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of lateral doors
   Removal, installation and adjustment of provision of a cowl
   Removal, installation and adjustment of provision of a door of a back (Hatchback models and Versatile person)
   Removal, installation and adjustment of provision of a cover of a luggage compartment (Sedan model)
   Removal and installation of door rear-view mirrors
   Replacement of the aerial of a radio receiver
   Removal and installation of forward wings
   Removal and dashboard installation
   Removal and installation of the central console
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of the external handle of a door and elements of a drive of a latch of the lock
   Removal and installation of the cylinder of the lock of a lateral door
   Removal and installation of the cylinder of the lock of a door of a back/cover of a luggage compartment
   Removal and installation of the handle of a door of a back
   Removal and installation of door glass and window regulator regulator
   Removal and installation of the electromotor of a drive of a window regulator
   Replacement of a salonny rear-view mirror
   Removal and installation of seats
   Removal and installation of the electromotor of a drive of a seat
+ Onboard electric equipment


Removal, installation and adjustment of provision of a cowl

Removal

 PERFORMANCE ORDER

1. Open a cowl and prop up it a persistent rod

2. A marker lead round the loopy levels fixed on a cowl.

3. Disconnect from built in in a cowl snuffled washing wind la plastic tubes flew down.

4. Disconnect the corresponding electroconducting.

5. Turn out bolts of fastening of a cowl to loopy levels, - ask the assistant to hold back edge of a cowl.

6. Accurately liberate a persistent rod and remove a cowl.


Installation

 PERFORMANCE ORDER

Work extremely carefully, - the slightest oversight can be at the bottom of windscreen damage!

1. Carefully get a cowl on the regular place and by hand tighten loopy bolts. At once prop up a cowl a persistent rod.
2. Achieve combination of loopy levels with the landing labels put in the course of dismantle, then strongly tighten fixing bolts.
3. Restore initial connection of electroconducting and tubes of washers of a windscreen.
4. Check correctness of installation of a cowl in a body aperture, in case of need make the corresponding adjustment (see below).


Adjustment

 PERFORMANCE ORDER

1. Close a cowl and check correctness of situation it in a body aperture. In case of need again open a cover and make necessary adjustment by weakening of fixture of loopy levels and shift them in the corresponding direction. Having finished adjustment, again strongly tighten fixing bolts.
2. Check serviceability of operation of a latch of the lock of a cowl. In case of need weaken bolts of fastening of a latch and as appropriate correct situation of the last concerning the drummer.
3. Make sure that the cowl in a closed position settles down aflush with surfaces of surrounding body panels. In case of need adjust the provision of a rubber emphasis by their rotation.