Mitsubishi Galant

1990 — 2001 of release

Repair and car operation



Mitsubishi Galant
+ Identification numbers of the car
+ Governing bodies
+ Settings and routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ Manual transmission
+ Coupling and transmission line
- Brake system
   Specifications
   Replacement of the sensor switch of stoplights
   Removal and GTTs installation
   Adjustment of a pedal of a foot brake
   Check of serviceability of functioning/tightness, removal and installation of the vacuum amplifier of brakes
   Removal and valve regulator installation
   Removal and installation of brake lines
   Pumping of brake system
   Disk brake mechanisms - the general information
   Assessment of a condition of brake shoes
   Replacement of blocks of disk brake mechanisms
   Removal and installation of supports of disk brake mechanisms
   Regenerative repair of a support of the disk brake mechanism
   Removal, check of a condition and installation of a brake disk
   Drum-type brake mechanisms - the general information
   Removal, installation and check of a condition of a brake drum
   Check of a condition of brake boots
   Removal and installation of brake boots
   Adjustment of drum-type brake mechanisms
   Removal, regenerative repair and installation of wheel cylinders
   Removal and cable installation (ов) drive of the parking brake
   Adjustment of the parking brake
   Removal and installation of frictional boots of the parking brake (model with disk brake mechanisms of back wheels)
   System of anti-blocking of brakes (ABS) - the general information, problem diagnostics and codes of malfunctions
   Removal and installation of the hydraulic modulator
   Removal and ABS control unit installation
   Removal and installation of wheel sensors
   Removal and installation of sensors of accelerations (G-sensors)
   Replacement of rotors of wheel sensors
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Removal and installation of frictional boots of the parking brake (model with disk brake mechanisms of back wheels)

Components of a drive of the parking brake on the Galant models since 1994 вып. with disk brake mechanisms of back wheels

1 — the Support of the brake mechanism
2 — the Brake disk
3 — the Anchor spring of a back boot
4 — the Anchor spring of a forward boot
5 — the Spring of an adjusting castor
6 — the Regulator
7 — Raspornaya a level

8 — the Returnable spring of a rasporny level
9 — the Plate of a directing spring
10 — the Directing spring of a boot
11 — the Anchor finger
12 — Frictional boots
13 — the Clamp
14 — Trosovy a drive of the parking brake


Components of a drive of the parking brake on the Diamante 1992 ÷ 1996 models of вып.

1 — the Wheel sensor (models with ABS)
2 — the Support of the brake mechanism
3 — the Brake disk
4 — the Spring of an adjusting castor
5 — the Plate of a directing spring
6 — the Directing spring of a boot
7 — the Anchor finger
8 — the Regulator
9 — the Anchor spring of a back boot
10 — the Anchor spring of a forward boot

11 — Raspornaya a level
12 — the Returnable spring of a rasporny level
13 — Frictional boots
14 — the Clamp
15 — the Protective cover of a stupichny nut
16 — Stupichnaya a nut
17 — the Washer
18 — the Wheel bearing
19 — the Brake board


Components of the parking brake on the Diamante models since 1997 вып.

1 — the Bolt of fastening of a support
2 — the Support
3 — the Brake disk
4 — the Wheel sensor
5 — Bolts of fastening of stupichny assembly
6 — Stupichnaya assembly
7 — the Screw of a directing spring of a frictional boot
8 — the Directing spring of a boot

9 — the Frictional boot
10 — the Antispray screen
11 — the Tip of fastening of a driving cable to the executive lever
12 — the Brake board
13 — the Adjusting castor
14 — the Cam
15 — the Pusher
16 — the Executive lever


The Galant models since 1994 вып. and Diamante 1992 ÷ 1996 of вып.

Removal

 PERFORMANCE ORDER

1. Components of a drive of the parking brake on the corresponding models are presented on illustrations.
2. To Poddomkratta the car also establish it on props.
3. Remove assembly of a brake support (see. Section Removal and installation of supports of disk brake mechanisms).
4. Remove a brake disk (see. Section Removal, check of a condition and installation of a brake disk).

5. Remove anchor springs of forward and back frictional boots.

6. Remove a spring of an adjusting castor and regulator assembly.
7. Remove a rasporny level with a returnable spring.
8. Remove directing springs and anchor fingers of frictional boots.
9. Remove bashmachny assemblies.
10. Release clamps, turn out fixing bolts and remove a cable of a drive of the parking brake.


Installation

 PERFORMANCE ORDER

Installation is made upside-down. Track correctness of installation of anchor springs, - they have various power characteristics and one of them is marked with paint.


The Diamante models since 1997 вып.

Removal

 PERFORMANCE ORDER

1. A design of the parking brake on the Diamante models since 1997 вып. it is presented on an illustration.
2. To Poddomkratta the car also establish it on props.
3. Remove a support (see. Section Removal and installation of supports of disk brake mechanisms).
4. Remove a brake disk (see. Section Removal, check of a condition and installation of a brake disk).
5. Turn out screws of directing springs and remove bashmachny assemblies from a brake board.


Installation

 PERFORMANCE ORDER

Installation is made upside-down.